

ECHO REDUCTION IN DFW
Echo Reduction for Commercial Spaces in DFW
Echo reduction makes a loud, ringing room clear again, so people hear each other without raising their voices. DeWalls Acoustic Specialties finds why your room echoes, then designs, supplies and installs the treatment for offices, restaurants, churches, gyms, schools and clinics across McKinney and DFW.
A room echoes because sound bounces off hard surfaces with nothing to absorb it. We add the absorption where it counts.

WHY ROOMS ECHO
Why Your Room Echoes
Sound hits the floor, walls and ceiling and bounces back. In a room with concrete, glass, drywall and an open ceiling, the bounces pile up. Engineers call the time it takes the sound to fade the reverberation time, or RT60. A longer RT60 means a room that rings and a voice that blurs.
The biggest bare surface is usually the ceiling, so it is the first place we look. Walls come next. Soft furniture and rugs help, but rarely enough in a large room.
Echo is an absorption problem. If sound from the room also leaks into the next room, you have a second problem and need soundproofing. We tell you which one you have.
Echo inside the room needs absorption. Noise reaching the next room needs soundproofing.
CORE CAPABILITIES
How We Reduce Echo
We rate panels by NRC (how much sound they absorb).
TRUSTED ACOUSTIC EXPERTISE
Proven Results for
DFW Spaces
30+
GOOGLE REVIEWS
4.9
AVERAGE RATING
50+
YEARS OF SERVICE
“DeWalls is hands down the best soundproofer in the business. I have been a home manager for many years, including for one of the four founders of Pizza Hut, and DeWalls is not only the best vendor I have ever worked with as far as their quality, ...”
K
Kallam
“This acoustic panel company, led by Eduardo and his team, turned my home office into an auditory haven. Before their intervention, the persistent echo during Zoom/Teams calls was a constant source of complaints...”
J
Jeff Hines
“Eduardo was extremely helpful with a commercial office building noise related issue. He came out right away, gave his suggestions and explained what the noise level standard was supposed to be at in office buildings…”
S
Sasha Kelsey
THE DEWALLS APPROACH
HOW A PROJECT WORKS
Our Process
1
Site Visit
We walk around the room and listen. A clap test shows how long the echo lasts.
2
Measure
We note room size, ceiling height and finishes.
3
Design and Scope
Panel type, count and placement, with the scope in writing.
4
Installation
Scheduled around your hours, with lifts for high ceilings.
5
Walkthrough
We check the result with you before we leave.
TECHNICAL INSIGHTS
Echo Reduction FAQs
How do you reduce echo in a room?
Add absorbing surfaces where sound bounces most: the ceiling first, then the walls. Panels, baffles and clouds do this. We size the treatment to the room.
What ceiling panels reduce reverberation in an open-plan office?
Ceiling clouds, baffles and boards, because the ceiling is the largest bare surface. The best mix depends on ceiling height and what hangs there.
What is RT60?
It is the time sound takes to fade away after the source stops. Shorter is clearer for speech. We tell you what to aim for in your room type.
Will acoustic treatment stop noise going into the next room?
No. It cuts echo inside the room. To block noise between rooms, you need soundproofing. We do both.
Does electronic echo reduction fix a room that rings?
Microphones and software can reduce echo on calls and recordings. They do not change how the room sounds to people in it. Panels do.
Can you install while we stay open?
Yes. We schedule after hours or on closed days.

START YOUR PROJECT
Ready for a Room
You Can Hear In?
Tell us where the noise comes from. No obligation, no pressure.

.png)

